Solid carbide single cutter: straight, pulling (right-hand twist)

 Solid carbide finishing cutter, Z = 2: pulling (right-hand twist), pushing (left-hand twist)

Solid carbide roughing cutter, Z = 2: pulling (right-hand twist), pushing (left-hand twist) Solid carbide roughing cutter, Z = 2: pulling (right-hand twist), pushing (left-hand twist)

Solid carbide finishing cutter, Z = 3: pulling (right-hand twist, pushing (left-hand twist) Solid carbide finishing cutter, Z = 3: pulling (right-hand twist, pushing (left-hand twist)

Solid carbide roughing cutter, Z = 3 Solid carbide roughing cutter, Z = 3

Carbide groove cutter, Z = 2, with drill bit Carbide groove cutter, Z = 2, with drill bit

Carbide indexable insert groove cutter, Z = 2 Carbide indexable insert groove cutter, Z = 2

Carbide face milling cutter, Z = 3 Carbide face milling cutter, Z = 3

Carbide face milling cutter, Z = 6 Carbide face milling cutter, Z = 6

Carbide indexable insert face milling cutter, Z = 3-5 Carbide indexable insert face milling cutter, Z = 3-5

Carbide groove profile cutter, Z = 2 Carbide groove profile cutter, Z = 2

Carbide groove profile cutter with radius Carbide groove profile cutter with radius

HM grooving saw, Z = 2 HM grooving saw, Z = 2

Labeled mandrel for grooving saw Labeled mandrel for grooving saw

HM grooving saw, Z = 4, with internal thread HM grooving saw, Z = 4, with internal thread

Named mandrel for grooving saw with internal thread Named mandrel for grooving saw with internal thread

Carbide flute cutter, Z = 1-2 Carbide flute cutter, Z = 1-2

Carbide flute cutter, Z = 2, with thrust bearing Carbide groove milling cutter, Z = 2, with thrust bearing

HM ball mill, Z = 1 HM ball mill, Z = 1

HM capillary cutter, Z = 2 HM capillary cutter, Z = 2

HM round profile cutter, Z = 2 HM round profile cutter, Z = 2

Carbide quarter rod cutter, Z = 2 Carbide quarter rod cutter, Z = 2

HM half rod cutter, Z = 2 HM half rod cutter, Z = 2

Carbide bevel cutter, Z = 2, with drill bit Carbide bevel cutter, Z = 2, with drill bit

Carbide bevel cutter, Z = 2, with contact bearing on the face Carbide bevel cutter, Z = 2, with contact bearing on the face

HM-V-groove cutter, Z = 2 HM-V-groove cutter, Z = 2

Carbide V-groove cutter, Z = 2, with reinforced polished cutting edge Carbide V-groove cutter, Z = 2, with reinforced polished cutting edge

Carbide dovetail and burr cutter, Z = 2 Carbide dovetail and burr cutter, Z = 2

Carbide dovetail cutter, Z = 2, for Hoffmann connection Carbide dovetail cutter, Z = 2, for Hoffmann connection

Carbide step milling cutter, Z = 2, with drill bit for milling grooves for bookcases Carbide step milling cutter, Z = 2, with drill bit for milling grooves for bookcases

Carbide step milling cutter, Z = 2, with drill bit for milling grooves in bevel gear Carbide step milling cutter, Z = 2, with drill bit for milling grooves in bevel gear

Carbide T-slot cutter, Z = 1 Carbide T-slot cutter, Z = 1

Carbide T-slot cutter, Z = 2 Carbide T-slot cutter, Z = 2

HM T-slot cutter, Z = 2, for shelf support systems Carbide T-slot cutter, Z = 2, for shelf support systems

HM T-slot cutter, Z = 2, for shelf support systems Carbide T-slot cutter, Z = 2, for shelf support systems

Carbide T-slot cutter, Z = 2, for shelf support systems, with radius Carbide T-slot cutter, Z = 2, for shelf support systems, with radius

Carbide T-slot cutter, Z = 2, with radius Carbide T-slot cutter, Z = 2, with radius

Carbide face and rebate milling cutter, Z = 2 Carbide face and rebate milling cutter, Z = 2

Carbide rebate cutter, Z = 2, with run-on pin Carbide rebate cutter, Z = 2, with run-up journal

Carbide rebate cutter, Z = 2, with thrust bearing Carbide rebate cutter, Z = 2, with thrust bearing

Carbide indexable insert rebate cutter, Z = 2, with contact bearing Carbide indexable insert rebate cutter, Z = 2, with contact bearing

Carbide rebate cutter, Z = 4, with thrust bearing Carbide rebate cutter, Z = 4, with thrust bearing

Carbide indexable insert rebate cutter, Z = 4, with contact bearing Carbide indexable insert rebate cutter, Z = 4, with contact bearing

Carbide trimming cutter, Z = 2, with thrust bearing on the shank side Carbide trimming cutter, Z = 2, with thrust bearing on the shank side

Carbide trimming cutter, Z = 2, without shear angle, with face bearing Carbide trimming cutter, Z = 2, without shear angle, with face bearing

Carbide copying indexable insert trimming cutter, Z = 2, with thrust bearing on the shank side Carbide copying indexable insert trimming cutter, Z = 2, with thrust bearing on the shank side

Carbide indexable insert trimming cutter, Z = 2, with contact bearing on the face Carbide indexable insert trimming cutter, Z = 2, with contact bearing on the face

Carbide trimming cutter, Z = 2, with thrust bearing and negative shear angle Carbide trimming cutter, Z = 2, with thrust bearing and negative shear angle

Carbide double flush milling cutter, Z = 2 + 2, with contact bearing Carbide double flush cutter, Z = 2 + 2, with support bearing

Carbide reversible insert double flush milling cutter, Z = 2 + 2, with support bearing Carbide reversible insert double flush milling cutter, Z = 2 + 2, with contact bearing

Carbide trimming cutter, Z = 2, with contact bearing above and below Carbide trimming cutter, Z = 2, with contact bearing above and below

Carbide indexable insert trimming cutter, Z = 2, with contact bearing above and below Carbide indexable insert trimming cutter, Z = 2, with contact bearing above and below

Carbide circular saw blade Carbide hand-held circular saw blade

TCT circular saw blade, with trapezoidal flat tooth TCT circular saw blade, with trapezoidal flat tooth

Carbide circular saw blade, for standard machines Carbide circular saw blade, for standard machines

Carbide machine circular saw blade, with deflector and alternating tooth Carbide machine circular saw blade, with deflector and alternating tooth

Carbide machine circular saw blade, format and trimming blade, alternate tooth Carbide machine circular saw blade, format and trimming blade, alternate tooth

Carbide machine circular saw blade, with trapezoidal flat tooth Carbide machine circular saw blade, with trapezoidal flat tooth

TCT dowel drill, Z = 2, with center point and spur TCT dowel drill, Z = 2, with center point and spur

Carbide through hole twist drill, with roof-shaped tip and depth adjustment screw Carbide through hole twist drill, with roof-shaped tip and depth adjustment screw

DIA end mill, Z = 2, with shear angle DIA end mill, Z = 2, with shear angle

DIA end mill, Z = 3 DIA end mill, Z = 3

DIA end mill, with shear angle and HW cutting edge, clockwise rotation, Z = 1 + 1 DIA end mill, with shear angle and HW insert, clockwise rotation, Z = 1 + 1

DIA-T-slot cutter, Z = 2, for shelf support systems, with radius DIA-T-slot cutter, Z = 2, for shelf support systems, with radius

DIA-T-slot cutter, Z = 2, for shelf support systems DIA-T-slot cutter, Z = 2, for shelf support systems

DIA-T-slot cutter, Z = 2, for shelf support systems DIA-T-slot cutter, Z = 2, for shelf support systems